Bolt pattern chart › 4x114.3
4x114.3 Bolt Pattern — what cars have it
A 4x114.3 bolt pattern means 4 lug holes on a 114.3 mm circle — 4.5 inches, so it is also written 4x4.5. One vehicle in our database uses it, listed below with the center bore, stud thread and lug torque each one actually needs.
| Pattern | 4x114.3 mm |
|---|---|
| In inches | 4x4.5 (114.3 ÷ 25.4 = 4.5) |
| Lug count | 4 |
| In our database | 1 vehicle, 1 generation, 0 verified against two manufacturer sources |
Vehicles with a 4x114.3 bolt pattern
| Vehicle | Years | Center bore | Thread | Lug torque | Status |
|---|---|---|---|---|---|
| Honda Accord | 1998–2002 · 4-cylinder (DX, LX, EX, SE) | 64.1 mm | M12x1.5 | 80 lb-ft | candidate |
Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.
Same 4x114.3 pattern, not the same wheel
A 4x114.3 wheel bolts onto any 4x114.3 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 4x114.3 comes with one hardware combination:
| Center bore | Thread | Fastener | Seen on |
|---|---|---|---|
| 64.1 mm | M12x1.5 | studs + nuts | Honda Accord |
A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.
4x114.3 — frequently asked
Is 4x114.3 the same as 4x4.5?
Yes. 4x114.3 and 4x4.5 are the same bolt pattern written in metric and in inches: 114.3 mm ÷ 25.4 = 4.5 in. A wheel marked either way fits the same 4-lug hub.
What cars have a 4x114.3 bolt pattern?
In our database: Honda Accord (1998–2002 4-cylinder). 0 of 1 rows are verified against two manufacturer documents; the rest are candidate values — the vehicle page shows the sources and the status of each row.
Do all Honda Accord model years use 4x114.3?
No. Honda Accord 2018–2025 is 5x114.3; Honda Accord 2013–2017 is 5x114.3; Honda Accord 2008–2012 is 5x114.3; Honda Accord 2003–2007 is 5x114.3; Honda Accord 1998–2002 V6 is 5x114.3. Check the model year and trim before buying wheels — wheels from the other generation or trim will not fit.
What center bore and lug nuts does a 4x114.3 wheel need?
That depends on the vehicle, not the pattern. Across the vehicles above, 4x114.3 comes with one combination: 64.1 mm bore, M12x1.5 studs + nuts (Honda Accord). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.
Tools for 4x114.3
Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 4x114.3 ↔ 4x4.5 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →