6x135 Bolt Pattern — what cars have it
A 6x135 bolt pattern means 6 lug holes on a 135 mm circle — 5.31 inches, so it is also written 6x5.31. One vehicle in our database uses it, listed below with the center bore, stud thread and lug torque each one actually needs.
| Pattern | 6x135 mm |
|---|---|
| In inches | 6x5.31 (135 ÷ 25.4 = 5.31) |
| Lug count | 6 |
| In our database | 1 vehicle, 1 generation, 1 verified against two manufacturer sources |
Vehicles with a 6x135 bolt pattern
| Vehicle | Years | Center bore | Thread | Lug torque | Status |
|---|---|---|---|---|---|
| Ford F-150 | 2015–2024 | 87.1 mm | M14x1.5 | 150 lb-ft | verified |
Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.
Same pattern, not the same wheel
A 6x135 wheel bolts onto any 6x135 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 6x135 comes with one hardware combination:
| Center bore | Thread | Fastener | Seen on |
|---|---|---|---|
| 87.1 mm | M14x1.5 | studs + nuts | Ford F-150 |
A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.
6x135 — frequently asked
Is 6x135 the same as 6x5.31?
Yes. 6x135 and 6x5.31 are the same bolt pattern written in metric and in inches: 135 mm ÷ 25.4 = 5.31 in. A wheel marked either way fits the same 6-lug hub.
What cars have a 6x135 bolt pattern?
In our database: Ford F-150 (2015–2024). Each is stated from manufacturer documents — the vehicle page shows the source and whether the row is verified.
Is 6x135 the same as 6x139.7?
No. 6x135 (6x5.31) and 6x139.7 (6x5.5) are 4.7 mm apart. The numbers look similar and both are 6-lug, but a 6x139.7 wheel will not bolt onto a 6x135 hub correctly and must not be forced.
Is 6x135 the same as 6x130?
No. 6x135 (6x5.31) and 6x130 (6x5.12) are 5 mm apart. The numbers look similar and both are 6-lug, but a 6x130 wheel will not bolt onto a 6x135 hub correctly and must not be forced.
What center bore and lug nuts does a 6x135 wheel need?
That depends on the vehicle, not the pattern. Across the vehicles above, 6x135 comes with one combination: 87.1 mm bore, M14x1.5 studs + nuts (Ford F-150). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.
Other 6-lug patterns
6x114.3 (6x4.5) · 6x120 (6x4.72) · 6x139.7 (6x5.5) — all 6-lug patterns with vehicle pages here. Full list on the bolt pattern conversion chart.
Tools for 6x135
Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 6x135 ↔ 6x5.31 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →