7x150 Bolt Pattern — what cars have it
A 7x150 bolt pattern means 7 lug holes on a 150 mm circle — 5.91 inches, so it is also written 7x5.91. One vehicle in our database uses it, listed below with the center bore, stud thread and lug torque each one actually needs.
| Pattern | 7x150 mm |
|---|---|
| In inches | 7x5.91 (150 ÷ 25.4 = 5.91) |
| Lug count | 7 |
| In our database | 1 vehicle, 1 generation, 1 verified against two manufacturer sources |
Vehicles with a 7x150 bolt pattern
| Vehicle | Years | Center bore | Thread | Lug torque | Status |
|---|---|---|---|---|---|
| Ford F-150 | 2000–2003 · 7700 lb Heavy Payload Package (7-lug) | 87.1 mm | M12x1.75 | 100 lb-ft | verified |
Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.
Same pattern, not the same wheel
A 7x150 wheel bolts onto any 7x150 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 7x150 comes with one hardware combination:
| Center bore | Thread | Fastener | Seen on |
|---|---|---|---|
| 87.1 mm | M12x1.75 | studs + nuts | Ford F-150 |
A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.
7x150 — frequently asked
Is 7x150 the same as 7x5.91?
Yes. 7x150 and 7x5.91 are the same bolt pattern written in metric and in inches: 150 mm ÷ 25.4 = 5.91 in. A wheel marked either way fits the same 7-lug hub.
What cars have a 7x150 bolt pattern?
In our database: Ford F-150 (2000–2003). Each is stated from manufacturer documents — the vehicle page shows the source and whether the row is verified.
Do all Ford F-150 model years use 7x150?
No. Ford F-150 2015–2024 is 6x135; Ford F-150 2000–2003 is 5x135. Check the model year before buying wheels — wheels from the other generation will not fit.
What center bore and lug nuts does a 7x150 wheel need?
That depends on the vehicle, not the pattern. Across the vehicles above, 7x150 comes with one combination: 87.1 mm bore, M12x1.75 studs + nuts (Ford F-150). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.
Tools for 7x150
Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 7x150 ↔ 7x5.91 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →