8x170 Bolt Pattern — what cars have it
A 8x170 bolt pattern means 8 lug holes on a 170 mm circle — 6.69 inches, so it is also written 8x6.69. One vehicle in our database uses it, listed below with the center bore, stud thread and lug torque each one actually needs.
| Pattern | 8x170 mm |
|---|---|
| In inches | 8x6.69 (170 ÷ 25.4 = 6.69) |
| Lug count | 8 |
| In our database | 1 vehicle, 3 generations, 3 verified against two manufacturer sources |
Vehicles with a 8x170 bolt pattern
| Vehicle | Years | Center bore | Thread | Lug torque | Status |
|---|---|---|---|---|---|
| Ford F-250 | 2023-2026 | 124.9 mm | M14x1.5 | 150 lb-ft | verified |
| 2020-2022 | 124.9 mm | M14x1.5 | 150 lb-ft | verified | |
| 2017-2019 | 124.9 mm | M14x1.5 | 165 lb-ft | verified |
Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.
Same pattern, not the same wheel
A 8x170 wheel bolts onto any 8x170 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 8x170 comes with one hardware combination:
| Center bore | Thread | Fastener | Seen on |
|---|---|---|---|
| 124.9 mm | M14x1.5 | studs + nuts | Ford F-250 |
A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.
8x170 — frequently asked
Is 8x170 the same as 8x6.69?
Yes. 8x170 and 8x6.69 are the same bolt pattern written in metric and in inches: 170 mm ÷ 25.4 = 6.69 in. A wheel marked either way fits the same 8-lug hub.
What cars have a 8x170 bolt pattern?
In our database: Ford F-250 (2023-2026, 2020-2022, 2017-2019). Each is stated from manufacturer documents — the vehicle page shows the source and whether the row is verified.
Is 8x170 the same as 8x165.1?
No. 8x170 (8x6.69) and 8x165.1 (8x6.5) are 4.9 mm apart. The numbers look similar and both are 8-lug, but a 8x165.1 wheel will not bolt onto a 8x170 hub correctly and must not be forced.
What center bore and lug nuts does a 8x170 wheel need?
That depends on the vehicle, not the pattern. Across the vehicles above, 8x170 comes with one combination: 124.9 mm bore, M14x1.5 studs + nuts (Ford F-250). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.
Other 8-lug patterns
8x165.1 (8x6.5) · 8x180 (8x7.09) — all 8-lug patterns with vehicle pages here. Full list on the bolt pattern conversion chart.
Tools for 8x170
Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 8x170 ↔ 8x6.69 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →