Bolt pattern finder › Jeep › Commander
Jeep Commander Bolt Pattern by Year
Looking up the Jeep Commander bolt pattern by year? Every model year we cover (2006–2010) uses 5x127 (5x5), a candidate value not yet OEM-verified. Specs and sources below.
Shopping for wheels? Check a new wheel and tire against a stock 2006-2010 Commander →
2006-2010 1st gen Commander bolt pattern 1st gen (XK)
| Bolt pattern | 5x127 (5x5) |
|---|---|
| Center bore | 71.5 mm |
| Thread pitch | 1/2-20 |
| Lug torque | 95 lb-ft |
| OEM wheel sizes | unverified - no wheel size read in a Jeep document |
| OEM offset | unverified |
| OEM tire sizes | unverified - no OEM tire size found in the manuals read |
Sources (3) — what has been checked so far
- Owner's manual 2006 Jeep Commander Owner's Manual (Mopar publication 865), 'WHAT TO DO IN EMERGENCIES', printed p — open document
Full citation and quoted values
2006 Jeep Commander Owner's Manual (Mopar publication 865), 'WHAT TO DO IN EMERGENCIES', printed p. 337 (PDF p. 337): 'wheel nut tightness is 130 N·m (95 ft. lbs).'
- Owner's manual 2008 Jeep Commander Owner's Manual (Mopar publication 798), printed p — open document
Full citation and quoted values
2008 Jeep Commander Owner's Manual (Mopar publication 798), printed p. 373 (PDF p. 373): 'wheel nut tightness is 130 N·m (95 ft. lbs).'
- Owner's manual 2010 Jeep Commander Owner's Manual (Mopar publication 735), printed p — open document
Full citation and quoted values
2010 Jeep Commander Owner's Manual (Mopar publication 735), printed p. 350 (PDF p. 350): 'wheel nut tightness is 95 ft lbs (130 N·m).'
Documents are linked at the manufacturer's own site, not re-hosted here; they remain the manufacturer's copyright.
Jeep Commander bolt pattern — frequently asked
What is the Jeep Commander bolt pattern?
5x127, which is 5x5 in inches, on every Commander generation in our database (2006–2010).
Do all Commander model years have the same bolt pattern?
Yes, across 2006–2010: 5x127. Years outside 2006–2010 are not in our database and are not covered by this answer.
Is the Jeep Commander 5x127 pattern the same as 5x5?
Yes. 5x127 is the metric notation and 5x5 the inch notation of the same bolt pattern (127 mm ÷ 25.4). Every vehicle on it is listed on the 5x127 pattern page.
Will 5x130 (5x5.12) wheels fit a Commander?
No. The Commander is 5x127; 5x130 is 3 mm larger and not interchangeable.
Which other vehicles use the same 5x127 bolt pattern as the Commander?
In our database: Jeep Wrangler, Jeep Gladiator, Jeep Grand Cherokee (not yet verified), Dodge Durango (not yet verified). Same pattern is not the same wheel — center bore and stud thread still have to match; see the 5x127 pattern page.
What is the lug nut torque for a Jeep Commander?
2006-2010: 95 lb-ft. Use a torque wrench and the manufacturer figure for your exact year; aftermarket wheels may specify their own.
Wheel fitment tools for the Jeep Commander
Will new wheels fit your Commander? Compare width, offset and tire size to stock →
All vehicles with a 5x127 bolt pattern →
Also 5x127: Jeep Wrangler, Jeep Gladiator, Jeep Grand Cherokee (not yet verified), Dodge Durango (not yet verified)
Other Jeep bolt patterns: Cherokee, Wrangler, Gladiator, Grand Cherokee
Bolt pattern finder: look up any other vehicle →
Convert 5x127 to inches →
Center bore check: hub-centric ring or not →
Lug nut torque chart →
Tire to rim width calculator: which tire widths fit a wheel →
Wheel spacer calculator: effective offset and stud engagement →
Wheel offset calculator: how far a new offset moves the wheel vs stock →