5x127 Bolt Pattern — what cars have it
A 5x127 bolt pattern means 5 lug holes on a 127 mm circle — 5 inches, so it is also written 5x5. 3 vehicles in our database use it, listed below with the center bore, stud thread and lug torque each one actually needs.
| Pattern | 5x127 mm |
|---|---|
| In inches | 5x5 (127 ÷ 25.4 = 5) |
| Lug count | 5 |
| In our database | 3 vehicles, 8 generations, 4 verified against two manufacturer sources |
Vehicles with a 5x127 bolt pattern
| Vehicle | Years | Center bore | Thread | Lug torque | Status |
|---|---|---|---|---|---|
| Jeep Gladiator | 2020–2024 | 71.54 mm | M14x1.5 | 130 lb-ft | verified |
| Jeep Grand Cherokee | 2021-2026 · WL (2021+ redesign) | 71.5 mm | M14x1.5 | 130 lb-ft | candidate |
| 2014-2022 · Non-SRT trims | 71.5 mm | M14x1.5 | 130 lb-ft | candidate | |
| 2014-2021 · SRT / Trackhawk | 71.5 mm | M14x1.5 | 110 lb-ft | candidate | |
| 2011-2013 | 71.5 mm | M14x1.5 | 110 lb-ft | candidate | |
| Jeep Wrangler | 2018–2024 | 71.54 mm | M14x1.5 | 130 lb-ft | verified |
| 2014–2017 | 71.54 mm | 1/2-20 | 100 lb-ft | verified | |
| 2007–2013 | 71.54 mm | 1/2-20 | 95 lb-ft | verified |
Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.
Same pattern, not the same wheel
A 5x127 wheel bolts onto any 5x127 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 5x127 comes with 3 different hardware combinations:
| Center bore | Thread | Fastener | Seen on |
|---|---|---|---|
| 71.5 mm | M14x1.5 | studs + nuts | Jeep Grand Cherokee |
| 71.54 mm | M14x1.5 | studs + nuts | Jeep Wrangler, Jeep Gladiator |
| 71.54 mm | 1/2-20 | studs + nuts | Jeep Wrangler |
A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.
5x127 — frequently asked
Is 5x127 the same as 5x5?
Yes. 5x127 and 5x5 are the same bolt pattern written in metric and in inches: 127 mm ÷ 25.4 = 5 in. A wheel marked either way fits the same 5-lug hub.
What cars have a 5x127 bolt pattern?
In our database: Jeep Gladiator (2020–2024); Jeep Grand Cherokee (2021-2026, 2014-2022, 2014-2021, 2011-2013); Jeep Wrangler (2018–2024, 2014–2017, 2007–2013). Each is stated from manufacturer documents — the vehicle page shows the source and whether the row is verified.
Is 5x127 the same as 5x130?
No. 5x127 (5x5) and 5x130 (5x5.12) are 3 mm apart. The numbers look similar and both are 5-lug, but a 5x130 wheel will not bolt onto a 5x127 hub correctly and must not be forced.
What center bore and lug nuts does a 5x127 wheel need?
That depends on the vehicle, not the pattern. Across the vehicles above, 5x127 comes with 3 combinations: 71.5 mm bore, M14x1.5 studs + nuts (Jeep Grand Cherokee); 71.54 mm bore, M14x1.5 studs + nuts (Jeep Wrangler, Jeep Gladiator); 71.54 mm bore, 1/2-20 studs + nuts (Jeep Wrangler). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.
Other 5-lug patterns
5x112 (5x4.41) · 5x114.3 (5x4.5) · 5x115 (5x4.53) · 5x120 (5x4.72) · 5x120.65 (5x4.75) · 5x139.7 (5x5.5) · 5x150 (5x5.91) — all 5-lug patterns with vehicle pages here. Full list on the bolt pattern conversion chart.
Tools for 5x127
Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 5x127 ↔ 5x5 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →