5x112 Bolt Pattern — what cars have it

A 5x112 bolt pattern means 5 lug holes on a 112 mm circle — 4.41 inches, so it is also written 5x4.41. 4 vehicles in our database use it, listed below with the center bore, stud thread and lug torque each one actually needs.

Pattern5x112 mm
In inches5x4.41 (112 ÷ 25.4 = 4.41)
Lug count5
In our database4 vehicles, 4 generations, 2 verified against two manufacturer sources

Vehicles with a 5x112 bolt pattern

VehicleYearsCenter boreThreadLug torqueStatus
Audi Q5 2018-2024 66.5 mm M14x1.5 (wheel bolts) 100 lb-ft verified
BMW 3 Series 2019-2024 66.6 mm M14x1.25 (wheel bolts) 103 lb-ft candidate
BMW X5 2019-2024 66.6 mm M14x1.25 (wheel bolts) 103 lb-ft candidate
Volkswagen Golf GTI 2022-2024 57.1 mm M14x1.5 (wheel bolts) 103 lb-ft verified

Each vehicle page cites the manufacturer documents behind these figures. Candidate rows are pending two-source verification and show a warning on their page.

Same pattern, not the same wheel

A 5x112 wheel bolts onto any 5x112 hub, but it only fits if the center bore clears the hub and the nuts or bolts match the studs. Across the vehicles above, 5x112 comes with 3 different hardware combinations:

Center boreThreadFastenerSeen on
57.1 mmM14x1.5wheel boltsVolkswagen Golf GTI
66.5 mmM14x1.5wheel boltsAudi Q5
66.6 mmM14x1.25wheel boltsBMW 3 Series, BMW X5

A wheel with a smaller bore than the hub will not seat; a larger bore needs a hub-centric ring. Thread and seat type decide which lug nuts to use, and the torque figure is per vehicle, not per pattern — see the lug nut torque chart.

Commonly confused: 5x110 (5x4.33), 5x114.3 (5x4.5), 5x115 (5x4.53), 5x108 (5x4.25). 5x110 is 2 mm smaller; 5x114.3 is 2.3 mm larger; 5x115 is 3 mm larger; 5x108 is 4 mm smaller — visibly different once measured, but the numbers look alike and both are 5-lug. Not interchangeable.

5x112 — frequently asked

Is 5x112 the same as 5x4.41?

Yes. 5x112 and 5x4.41 are the same bolt pattern written in metric and in inches: 112 mm ÷ 25.4 = 4.41 in. A wheel marked either way fits the same 5-lug hub.

What cars have a 5x112 bolt pattern?

In our database: Audi Q5 (2018-2024); BMW 3 Series (2019-2024); BMW X5 (2019-2024); Volkswagen Golf GTI (2022-2024). Each is stated from manufacturer documents — the vehicle page shows the source and whether the row is verified.

Is 5x112 the same as 5x110?

No. 5x112 (5x4.41) and 5x110 (5x4.33) are 2 mm apart. The numbers look similar and both are 5-lug, but a 5x110 wheel will not bolt onto a 5x112 hub correctly and must not be forced.

Is 5x112 the same as 5x114.3?

No. 5x112 (5x4.41) and 5x114.3 (5x4.5) are 2.3 mm apart. The numbers look similar and both are 5-lug, but a 5x114.3 wheel will not bolt onto a 5x112 hub correctly and must not be forced.

Is 5x112 the same as 5x115?

No. 5x112 (5x4.41) and 5x115 (5x4.53) are 3 mm apart. The numbers look similar and both are 5-lug, but a 5x115 wheel will not bolt onto a 5x112 hub correctly and must not be forced.

Is 5x112 the same as 5x108?

No. 5x112 (5x4.41) and 5x108 (5x4.25) are 4 mm apart. The numbers look similar and both are 5-lug, but a 5x108 wheel will not bolt onto a 5x112 hub correctly and must not be forced.

What center bore and lug nuts does a 5x112 wheel need?

That depends on the vehicle, not the pattern. Across the vehicles above, 5x112 comes with 3 combinations: 57.1 mm bore, M14x1.5 wheel bolts (Volkswagen Golf GTI); 66.5 mm bore, M14x1.5 wheel bolts (Audi Q5); 66.6 mm bore, M14x1.25 wheel bolts (BMW 3 Series, BMW X5). The wheel's center bore must be at least the hub's diameter; a larger bore needs a hub-centric ring.

Other 5-lug patterns

5x114.3 (5x4.5) · 5x115 (5x4.53) · 5x120 (5x4.72) · 5x120.65 (5x4.75) · 5x127 (5x5) · 5x139.7 (5x5.5) · 5x150 (5x5.91) — all 5-lug patterns with vehicle pages here. Full list on the bolt pattern conversion chart.

Tools for 5x112

Bolt pattern finder — look up any vehicle →
Bolt pattern converter — 5x112 ↔ 5x4.41 →
Measure a pattern you can't identify →
How to measure a bolt pattern (guide) →

Specs are provided for reference and compiled from manufacturer documents, not copied from wheel catalogues. Confirm the pattern, center bore and thread against your own vehicle before buying or fitting wheels.