Bolt pattern finder › Ford › Ranger
Ford Ranger — Bolt Pattern & Wheel Fitment
The Ford Ranger bolt pattern varies by model year: 6x139.7 (6x5.5) for 2019–2025 (OEM-verified); 5x114.3 (5x4.5) for 1998–2011 (OEM-verified for 2002–2011 only). Find your model year below before buying wheels.
Ford Ranger bolt pattern by year
| Model years | Bolt pattern | Thread | Lug torque | Status |
|---|---|---|---|---|
| 2024–2025 5th gen (P703, NA launch) | 6x139.7 (6x5.5) | M12x1.5 | 100 lb-ft | OEM-verified |
| 2019–2023 4th gen (T6, NA) | 6x139.7 (6x5.5) | M12x1.5 | 100 lb-ft | OEM-verified |
| 2002–2011 3rd gen (PE/PG/PH), 2002+ | 5x114.3 (5x4.5) | 1/2-20 | 100 lb-ft | OEM-verified |
| 1998–2001 3rd gen (PE/PG/PH), 1998–2001 | 5x114.3 (5x4.5) | 1/2-20 | 100 lb-ft | Candidate |
2024–2025 5th gen Ranger bolt pattern 5th gen (P703, NA launch)
| Bolt pattern | 6x139.7 (6x5.5) |
|---|---|
| Center bore | 93.1 mm |
| Thread pitch | M12x1.5 |
| Lug torque | 100 lb-ft |
| OEM wheel sizes | 17x8.5 alloy (Raptor, +34 mm offset), 16x7 / 17x7.5 / 17x8.5 / 18x7.5 (other trims — diameters per aggregator consensus, widths not independently OEM-confirmed by this pass) |
| OEM offset | 55 mm (standard 4WD wheel; Raptor is +34 — do not use one figure for both) |
| OEM tire sizes | 255/70R16, 255/70R17, 255/65R18, LT255/70R17, LT285/70R17 (Raptor, on the 17x8.5 wheel) |
Sources (3) — verified against manufacturer documents
- Owner's manual 2024 Ford Ranger Owner's Manual (P703), Ford Motor Company, edition 202304 — open document
Full citation and quoted values
2024 Ford Ranger Owner's Manual (P703), Ford Motor Company, edition 202304 — "Wheel Nuts": Bolt Size M12 x 1.5, 100 lb.ft (135 Nm), single row, no alloy/steel or Raptor-specific variant. Same document's snow-chain-compatible tire list gives the non-Raptor factory sizes; the Wheel and Tire Information section gives the Raptor's 17x8.5, +34 ET wheel with LT285/70R17.
- OEM spec sheet / parts catalog Ford Performance Parts M-1007-RGR1785OR wheel product page: "Fits 2019-2026 Ranger 4WD Models", "6-lug, 139.7 mm bolt… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
Ford Performance Parts M-1007-RGR1785OR wheel product page: "Fits 2019-2026 Ranger 4WD Models", "6-lug, 139.7 mm bolt circle", "55 mm offset" — explicitly spans the P703 generation. "Not Compatible with Bronco Raptor" note is about the Bronco, not this Ranger wheel.
- OEM spec sheet / parts catalog Ford Performance Parts M-1012-BR Lug Nut Kit: "Fits 2019-2026 Ford Ranger (Including Raptor)", "M12 x 1.5 wheel stud" — open document
Full citation and quoted values
Ford Performance Parts M-1012-BR Lug Nut Kit: "Fits 2019-2026 Ford Ranger (Including Raptor)", "M12 x 1.5 wheel stud" — confirms Ranger Raptor shares the SAME stud as the standard truck (unlike Bronco Raptor, which does not).
Documents are linked at the manufacturer's own site, not re-hosted here; they remain the manufacturer's copyright.
2019–2023 4th gen Ranger bolt pattern 4th gen (T6, NA)
| Bolt pattern | 6x139.7 (6x5.5) |
|---|---|
| Center bore | 93.1 mm |
| Thread pitch | M12x1.5 |
| Lug torque | 100 lb-ft |
| OEM wheel sizes | 16x7 steel, 17x8 alloy, 18x8 alloy |
| OEM offset | 42–55 mm |
| OEM tire sizes | 255/65R17 (XLT base), LT265/65R17, LT265/70R17, 265/65R17, 265/60R18 |
Sources (2) — verified against manufacturer documents
- Owner's manual 2021/2022/2023 Ford Ranger Owner's Manuals — open document
Full citation and quoted values
2021/2022/2023 Ford Ranger Owner's Manuals — "Wheel Nuts": Bolt Size M12 x 1.5, 100 lb.ft (135 Nm), identical in every edition.
- OEM spec sheet / parts catalog Ford Performance Parts M-1012-BR Lug Nut Kit ("M12 x 1.5, 2019-2026 Ford Ranger") and a separate Ford Performance… — open document
Full citation and quoted values
Ford Performance Parts M-1012-BR Lug Nut Kit ("M12 x 1.5, 2019-2026 Ford Ranger") and a separate Ford Performance Ranger wheel product page — 2 distinct Ford Performance documents.
Documents are linked at the manufacturer's own site, not re-hosted here; they remain the manufacturer's copyright.
2002–2011 3rd gen Ranger bolt pattern 3rd gen (PE/PG/PH), 2002+
| Bolt pattern | 5x114.3 (5x4.5) |
|---|---|
| Center bore | 70.5 mm |
| Thread pitch | 1/2-20 |
| Lug torque | 100 lb-ft |
| OEM wheel sizes | 15x6.0J steel (spare/XL), 15x7.0J steel (7-spoke silver/chrome), 15x7.0J aluminum (machined / 8-hole forged), 16x7.0J cast aluminum |
| OEM offset | 12 mm |
| OEM tire sizes | P225/70R15, P235/75R15, P235/70R15, P235/60R16, P235/70R16, P245/75R16, P255/70R16, 31x10.5R15 LT (FX4 Off-Road / FX4 Level II) |
Sources (5) — verified against manufacturer documents
- Owner's manual 2002 Ranger Owner Guide 02ranog4e, PDF p.213: "fully tighten the lug nuts, in the order shown, to 135 Nm (100 lb-ft)."… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
2002 Ranger Owner Guide 02ranog4e, PDF p.213: "fully tighten the lug nuts, in the order shown, to 135 Nm (100 lb-ft)." and "Use only Ford recommended (1/2–20) replacement fasteners."
- Owner's manual 2005 Ranger Owner Guide 05ranog3e, PDF p.110, WHEEL LUG NUT TORQUE SPECIFICATIONS: "Lug nut socket size: 3/4\" (19 mm)… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
2005 Ranger Owner Guide 05ranog3e, PDF p.110, WHEEL LUG NUT TORQUE SPECIFICATIONS: "Lug nut socket size: 3/4\" (19 mm) hex / Bolt size: 1/2 x 20 / 100 [lb.ft.] 135 [N•m]" (identical in 06ranog1e p.178 and 08ranog2e p.193).
- Owner's manual 2011 Ranger Owner Guide 11ranog2e, PDF p.203: "Lug nut socket size/Bolt size Wheel lug nut torque* ft-lb N•m 1⁄2 x 20… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
2011 Ranger Owner Guide 11ranog2e, PDF p.203: "Lug nut socket size/Bolt size Wheel lug nut torque* ft-lb N•m 1⁄2 x 20 100 135".
- Body-builder guide Ford Truck Body Builders Layout Book (BBAS) 2003 Ranger, PDF p.10, WHEEL SPECIFICATIONS (columns Nominal Offset… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
Ford Truck Body Builders Layout Book (BBAS) 2003 Ranger, PDF p.10, WHEEL SPECIFICATIONS (columns Nominal Offset (in./mm), Number of Studs, Bolt Circle (in.)): "Argent Steel 15” x 6.0” J 0.5 /12 5 4.5 1500 | 7 Spoke Silver Styled-Steel 15” x 7.0” J 0.5/12 5 4.5 1600 | ... Cast Aluminum 16” x 7.0” J 0.5/12 5 4.5"; tires "P225/70R15 SL, P235/75R15 SL, P235/70R16 SL, P245/75R16 SL, 31X10.5R15 LT".
- Body-builder guide Ford BBAS 2009 Ranger specs, PDF p.10: all five wheels (15x7.0J steel/chrome-clad/machined aluminum, 16x7.0J cast… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
Ford BBAS 2009 Ranger specs, PDF p.10: all five wheels (15x7.0J steel/chrome-clad/machined aluminum, 16x7.0J cast aluminum) "0.5/12 5 4.5"; tires "P225/70R15 SL, P235/75R15 SL, P235/70R16 SL, P255/70R16 SL". The 2005 BBAS (PDF p.9) prints the same wheel table.
Documents are linked at the manufacturer's own site, not re-hosted here; they remain the manufacturer's copyright.
1998–2001 3rd gen Ranger bolt pattern 3rd gen (PE/PG/PH), 1998–2001
| Bolt pattern | 5x114.3 (5x4.5) |
|---|---|
| Center bore | 70.5 mm |
| Thread pitch | 1/2-20 |
| Lug torque | 100 lb-ft |
| OEM wheel sizes | 14x6.0J steel, 15x6.0J steel, 15x7.0J steel, 15x7.0J cast aluminum, 16x7.0J cast aluminum |
| OEM offset | 12 mm |
| OEM tire sizes | P225/70R15, P215/75R15, P225/75R15, P235/75R15, P265/75R15, P245/75R16, P245/70R16 |
Sources (2) — what has been checked so far
- Body-builder guide Ford BBAS 2000 Ranger (New or Revised 7/15/99), PDF p.10, WHEEL SPECIFICATIONS: "Stamped steel 14″ x 6.0″ J 0.5 5 4.5… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
Ford BBAS 2000 Ranger (New or Revised 7/15/99), PDF p.10, WHEEL SPECIFICATIONS: "Stamped steel 14″ x 6.0″ J 0.5 5 4.5 1500 | 15″ x 6.0″ J 0.5 5 4.5 1500 | 15″ x 7.0″ J 0.5 5 4.5 1600 | Cast aluminum 15″ x 7.0″ J 0.5 5 4.5 1600 | 16” x 7.0” J 0.5 5 4.5 1600"; TIRE SPECIFICATIONS "P225/70Rx15 SL, P215/75Rx15 SL, P235/75Rx15 SL, P265/75Rx15 SL, P245/75Rx16 SL".
- OEM spec sheet / parts catalog Ford Racing Performance Parts 2006 catalog, PDF p.29: "RANGER WHEEL M-1007-R157A • Fits 2001-03 Ranger • 5-lug, 114mm… — archived copy (the live page blocks non-browser access)
Full citation and quoted values
Ford Racing Performance Parts 2006 catalog, PDF p.29: "RANGER WHEEL M-1007-R157A • Fits 2001-03 Ranger • 5-lug, 114mm bolt circle • 4.31\" backspacing • 15\" x 7\" wide".
Documents are linked at the manufacturer's own site, not re-hosted here; they remain the manufacturer's copyright.
Ford Ranger bolt pattern — frequently asked
What is the Ford Ranger bolt pattern?
It depends on the model year: 2024–2025 is 6x139.7 (6x5.5); 2019–2023 is 6x139.7 (6x5.5); 2002–2011 is 5x114.3 (5x4.5); 1998–2001 is 5x114.3 (5x4.5), not yet verified. Wheels from one pattern will not fit the other.
Do all Ranger model years have the same bolt pattern?
No. 2024–2025 is 6x139.7 (6x5.5); 2019–2023 is 6x139.7 (6x5.5); 2002–2011 is 5x114.3 (5x4.5); 1998–2001 is 5x114.3 (5x4.5), not yet verified. Check the model year before buying wheels.
What is the 5th gen Ranger bolt pattern?
The 2024–2025 Ford Ranger 5th gen bolt pattern is 6x139.7 (6x5.5), six lugs on a 139.7 mm pitch circle.
What is the 4th gen Ranger bolt pattern?
The 2019–2023 Ford Ranger 4th gen bolt pattern is 6x139.7 (6x5.5), six lugs on a 139.7 mm pitch circle.
What is the 3rd gen Ranger bolt pattern?
The 1998–2011 Ford Ranger 3rd gen bolt pattern is 5x114.3 (5x4.5), five lugs on a 114.3 mm pitch circle (1998–2001 not yet verified).
Is the Ford Ranger 6x139.7 pattern the same as 6x5.5?
Yes. 6x139.7 is the metric notation and 6x5.5 the inch notation of the same bolt pattern (139.7 mm ÷ 25.4). Every vehicle on it is listed on the 6x139.7 pattern page.
Is the Ford Ranger 5x114.3 pattern the same as 5x4.5?
Yes. 5x114.3 is the metric notation and 5x4.5 the inch notation of the same bolt pattern (114.3 mm ÷ 25.4). Every vehicle on it is listed on the 5x114.3 pattern page.
Will 6x135 (6x5.31) wheels fit a 6x139.7 Ranger?
No. The Ranger (2024–2025, 2019–2023) is 6x139.7; 6x135 is 4.7 mm smaller and not interchangeable.
Will 5x115 (5x4.53) wheels fit a 5x114.3 Ranger?
No. The Ranger (2002–2011, 1998–2001) is 5x114.3; 5x115 is 0.7 mm larger and not interchangeable — the two are so close a tape measure cannot tell them apart, which is exactly why they get mixed up.
Will 5x112 (5x4.41) wheels fit a 5x114.3 Ranger?
No. The Ranger (2002–2011, 1998–2001) is 5x114.3; 5x112 is 2.3 mm smaller and not interchangeable.
Will 5x110 (5x4.33) wheels fit a 5x114.3 Ranger?
No. The Ranger (2002–2011, 1998–2001) is 5x114.3; 5x110 is 4.3 mm smaller and not interchangeable.
Will 5x120 (5x4.72) wheels fit a 5x114.3 Ranger?
No. The Ranger (2002–2011, 1998–2001) is 5x114.3; 5x120 is 5.7 mm larger and not interchangeable.
Which other vehicles use the same 6x139.7 bolt pattern as the Ranger?
In our database: Ram 1500, Chevrolet Silverado 1500 (not yet verified), Toyota Tundra, Toyota Tacoma, Toyota 4Runner (not yet verified), Ford Bronco, GMC Sierra 1500 (not yet verified), Chevrolet Tahoe (not yet verified), Toyota Sequoia (not yet verified), Chevrolet Colorado (not yet verified), Nissan Titan (not yet verified). Same pattern is not the same wheel — center bore and stud thread still have to match; see the 6x139.7 pattern page.
Which other vehicles use the same 5x114.3 bolt pattern as the Ranger?
In our database: Jeep Wrangler (not yet verified), Toyota Tacoma (not yet verified), Ford Mustang, Honda Accord, Ford Explorer (not yet verified), Honda Civic (not yet verified), Honda CR-V (not yet verified), Toyota Camry (not yet verified), Toyota RAV4, Toyota Highlander (not yet verified), Tesla Model 3 (not yet verified), Tesla Model Y (not yet verified), Subaru Outback (not yet verified), Subaru Forester, Nissan Altima (not yet verified), Hyundai Tucson (not yet verified), Nissan Rogue (not yet verified), Subaru Crosstrek (not yet verified), Kia Sportage (not yet verified), Nissan Sentra (not yet verified), Honda HR-V (not yet verified), Hyundai Elantra (not yet verified), Toyota Sienna (not yet verified), Mazda CX-5 (not yet verified). Same pattern is not the same wheel — center bore and stud thread still have to match; see the 5x114.3 pattern page.
What is the lug nut torque for a Ford Ranger?
2024–2025: 100 lb-ft; 2019–2023: 100 lb-ft; 2002–2011: 100 lb-ft; 1998–2001: 100 lb-ft. Use a torque wrench and the manufacturer figure for your exact year; aftermarket wheels may specify their own.
Wheel fitment tools for the Ford Ranger
Will new wheels fit your Ranger? Compare width, offset and tire size to stock →
All vehicles with a 6x139.7 bolt pattern →
Also 6x139.7: GMC Sierra 1500 (not yet verified), Chevrolet Tahoe (not yet verified), Toyota Sequoia (not yet verified), Chevrolet Colorado (not yet verified), Nissan Titan (not yet verified), Ram 1500, Chevrolet Silverado 1500 (not yet verified), Toyota Tundra
All vehicles with a 5x114.3 bolt pattern →
Also 5x114.3: Ford Mustang, Honda Accord, Ford Explorer (not yet verified), Honda Civic (not yet verified), Honda CR-V (not yet verified), Toyota Camry (not yet verified), Toyota RAV4, Toyota Highlander (not yet verified)
Other Ford bolt patterns: Mustang, F-250, Explorer, Maverick, Transit, Escape, F-150, Bronco
Bolt pattern finder: look up any other vehicle →
Bolt pattern changes by year: which vehicles switched →
Convert 6x139.7 to inches →
Center bore check: hub-centric ring or not →
Lug nut torque chart →
Tire to rim width calculator: which tire widths fit a wheel →
Wheel spacer calculator: effective offset and stud engagement →
Wheel offset calculator: how far a new offset moves the wheel vs stock →